43"W x 33"D x 30"H **** NEW IMPROVED ***** MADE WITH .080 THICK ALUMINUM Microfab Company generator enclosure was designed and built with the customer in mind. You will sleep at ease knowing that the generator will be secure and protected from outside elements. Generator enclosure is Powder Coated Aluminum to reduce corrosion and weight. Comes complete with four mounting holes at the base of the unit to lag and secure the enclosure and generator in cement or paver blocks. To ease access for re-filling the generator with Gasoline, we added double hinge front and top with notches on the sides to hold the door open. Please note, leaving the side door closed will result in damage to your generator. KEEP SIDE DOORS OPEN WHEN GENERATOR IS IN USE. Should you have CO2 detector,make sure the exhaust is directed outside of the enclosure otherwise your generator will turn off. In the front we have spring loaded handle with two (2) hasps for pad locks to secure the access to the generator from intruders. Now you can leave your generator outside and have more room in your garage or shed. In the back of the enclosure you have four (4) 1 3/4" Dia. holes for your cables and 3" Dia. hole for back exhaust for some of the generators. For units with side exhaust we have the side doors that have to remain opened while operation. Be sure to have licensed electrician install your cables and necessary boxes for electricity to your home from the generator. When the generator is not in use you could close the side doors and secure them with two 1/4"-20 bolts on each side and locked with pad locks. *********SOME ASSEMBLY REQUIRED*********** PLEASE NOTE: PLEASE CHECK PACKAGING UPON RECEIVING. IF PACKAGING IS TORN PLEASE TAKE PICTURES AND SEND TO ME. MAKE SURE NO PARTS WERE DAMAGED IN TIME OF TRANSIT.
Trustpilot
1 week ago
1 month ago